Edit Info Other
Login

NVIDIA"

Differences between revisions 42 and 64 (spanning 22 versions)
⇤ ← Revision 42 as of 2015-08-16 13:01:52 →
Size: 7198
Editor: Juan Carlos Barreto
Comment:
← Revision 64 as of 2016-11-06 09:39:58 → ⇥
Size: 7663
Editor: NicolasChauvet
Comment:
Deletions are marked like this. Additions are marked like this.
Line 14: Line 14:
/sbin/lspci | grep VGA /sbin/lspci | grep -e VGA
Line 17: Line 17:
You can also check the [[http://www.nvidia.com/Download/index.aspx|nVidia download driver]] section and see which serie is recommanded for you card, then install the appropriate driver serie. You can also check the [[http://us.download.nvidia.com/XFree86/Linux-x86/367.57/README/supportedchips.html|supported chips]] section and see which series is recommended for you card, then install the appropriate driver series.
Please remember that you need additional steps for optimus.

You are probably in the Optimus case if your NVIDIA card is found with the next command:
{{{
/sbin/lspci | grep -e 3D
}}}
Line 21: Line 27:
Please remember that once the driver is installed, it will configure your xorg.conf automatically only if it's not already present. You can also run nvidia-xconfig or nvidia-settings at anytime. Changes will take effect after a '''''full reboot''''' on the newest kernel. Please remember that once the driver is installed, there is no need to configure xorg.conf by default unless you are using an Optimus device. Changes will take effect after a '''''full reboot''''' on the newest kernel.
Line 23: Line 29:

=== Newer GeForce ===		 === Current GeForce/Quadro/Tesla ===
This driver is suitable for any GPU found in 2010 and later.
Line 26: Line 32:
yum install akmod-nvidia "kernel-devel-uname-r == $(uname -r)"
yum update -y		 dnf install xorg-x11-drv-nvidia akmod-nvidia "kernel-devel-uname-r == $(uname -r)"
dnf update -y
Line 31: Line 37:
Please note that as of today, the more recent nvidia driver release doesn't officially support Xorg server 1.19 as found in Fedora 25 and later. Support for Wayland is also missing in any nvidia driver as it's the default for Fedora 25.
Line 32: Line 39:
=== GeForce 8/9/200/300/405 ===
=== Legacy GeForce 8/9/200 ===
Line 34: Line 42:
yum install akmod-nvidia-340xx "kernel-devel-uname-r == $(uname -r)"
yum update -y		 dnf install xorg-x11-drv-nvidia-340xx akmod-nvidia-340xx "kernel-devel-uname-r == $(uname -r)"
dnf update -y
Line 39: Line 47:
=== GeForce 6/7 === === Legacy GeForce 6/7 ===
Line 41: Line 49:
yum install akmod-nvidia-304xx "kernel-devel-uname-r == $(uname -r)"
yum update -y		 dnf install xorg-x11-drv-nvidia-304xx akmod-nvidia-304xx "kernel-devel-uname-r == $(uname -r)"
dnf update -y
Line 44: Line 52:
=== GeForce 5 (FX series) === === Legacy GeForce 5 (FX series) ===
Line 50: Line 58:
=== GeForce 2 through GeForce 4 === === Legacy GeForce 2 through GeForce 4 ===
Line 59: Line 67:
=== Optimus ===
There are additional steps required to work with optimus. Please see the dedicated [[Howto/nVidia_Optimus]].


=== CUDA ===
The driver support CUDA when installing the xorg-x11-drv-nvidia-cuda subpackage.
Please have a look on the official NVIDIA [[http://docs.nvidia.com/cuda/cuda-getting-started-guide-for-linux/|getting started guide]]
{{{
dnf install xorg-x11-drv-nvidia-cuda
}}}


=== VULKAN ===
The main package support vulkan, but you need to install the vulkan libraries if requested.
{{{
dnf install vulkan
}}}
Line 62: Line 89:
yum --enablerepo=rpmfusion-nonfree-rawhide install akmod-nvidia
yum install "kernel-devel-uname-r == $(uname -r)"
yum update -y		 dnf install "kernel-devel == $(uname -r)"
dnf update -y
dnf --enablerepo=rpmfusion-nonfree-rawhide install akmod-nvidia
Line 69: Line 96:
yum --releasever=20 install akmod-nvidia
yum install "kernel-devel-uname-r == $(uname -r)"
yum update -y		 dnf install "kernel-devel-uname-r == $(uname -r)"
dnf update -y
dnf --releasever=25 install akmod-nvidia xorg-x11-drv-nvidia
Line 78: Line 105:
If you are on a 32bit (i686) system and have the PAE kernel installed to access more RAM, please append '''-PAE''' to all the "kmod" packages above. For example, '''kmod-nvidia-PAE''' or '''kmod-nvidia-96xx-PAE'''. This will install the kernel module for the PAE kernel instead of the regular 32bit kernel. Please note that this step is not required for any 64bit (x64_64) users. If you are on a 32bit (i686) system and have the kernel-PAE installed to access more RAM, please install kernel-PAE-devel. Please note that this step is not required for any 64bit (x64_64) users.
Line 83: Line 110:
# yum install vdpauinfo libva-vdpau-driver libva-utils # dnf install vdpauinfo libva-vdpau-driver libva-utils
Line 115: Line 142:
After the reboot, this command should not output anything: Once the driver is installed and after the reboot, this command should not output anything:
Line 119: Line 146:

=== Secure Boot ===
Sometimes, Secure Boot blocks the kernel loading the nvidia driver. It can be disabled before booting the OS as a test.
Line 124: Line 154:
Please remind that Xorg server version is also to take into consideration. As of today's Fedora 22 Rawhide, xorg-server is at 1.16 which is compatible with Nvidia current driver, 340xx and 304xx legacies series. (Nvidia 173xx legacy is not supported and been EOL by nvidia has been removed from the RPM Fusion repository by Fedora 21). Please remind that Xorg server version is also to take into consideration. In the case of incompatibilities with the xorg-server, you might need to downgrade to the previous fedora release:
{{{
dnf downgrade xorg-x11-server\* --releasever=22 --allowerasing
echo "exclude=xorg-x11*" >> /etc/dnf/dnf.conf
}}}
Line 130: Line 164:
yum remove xorg-x11-drv-nvidia\* dnf remove xorg-x11-drv-nvidia\*
Line 134: Line 168:
Line 135: Line 170:
If you still cannot make the driver to work, you can either report a problem to nVidia or to rpmfusion packager team.
Please read: [[http://www.nvnews.net/vbulletin/showthread.php?t=46678|How to report a problem about the nVidia proprietary driver]]		 If you still cannot make the driver to work, you can either report a problem to nVidia or to RPM Fusion packager team.
Please read: [[https://devtalk.nvidia.com/default/topic/522835/linux/if-you-have-a-problem-please-read-this-first/|If you have a problem, PLEASE read this first]]
Line 138: Line 173:
In case of troubles this list helped me
=== EXAMPLE: Newer GeForce ===
{{{
yum install akmod-nvidia "kernel-devel-uname-r == $(uname -r)"

init 3

mv /boot/initramfs-$(uname -r).img /boot/initramfs-$(uname -r)-nouveau.img
dracut /boot/initramfs-$(uname -r).img $(uname -r)

nvidia-xconfig
reboot
}}}

Source: https://ask.fedoraproject.org/en/question/7300/properly-install-nvidia-drivers/

Explanation: "init 3" gets out of GUI environment; then you login in command mode to root
With dracut, you ensure kernel will be loaded with nvidia driver module, instead of nouveau

IMPORTANT NOTE: webmaster of this forum can re-edit and IMPROVE above comment. Best regards!

Contents

  1. About this Howto
  2. Determining your card model
  3. Installing the drivers
    1. Current GeForce/Quadro/Tesla
    2. Legacy GeForce 8/9/200
    3. Legacy GeForce 6/7
    4. Legacy GeForce 5 (FX series)
    5. Legacy GeForce 2 through GeForce 4
  4. Special notes
    1. Optimus
    2. CUDA
    3. VULKAN
    4. Latest/Beta driver
    5. x86_64 (64bit) users
    6. PAE (Physical Address Extension) kernel users
    7. VDPAU/VAAPI
    8. Akmods
    9. Nouveau compatibility
    10. Secure Boot
    11. Rawhide
  5. Uninstall the nvidia driver
  6. Bug Report

About this Howto

This howto will help you install the correct nVidia driver for your graphics card as well as troubleshoot common driver problems.

The prerequisite is to have followed the Configuration page to have at least the RPM Fusion nonfree section available.

Determining your card model

nVidia has several driver series, each of which has different hardware support. To determine which driver you need to install, you'll first need to find your graphics card model.

If you don't know it, open a Terminal (Applications > System Tools > Terminal) and type: 

/sbin/lspci | grep -e VGA

You can also check the supported chips section and see which series is recommended for you card, then install the appropriate driver series. Please remember that you need additional steps for optimus.

You are probably in the Optimus case if your NVIDIA card is found with the next command: 

/sbin/lspci | grep -e 3D

Installing the drivers

Please remember that once the driver is installed, there is no need to configure xorg.conf by default unless you are using an Optimus device. Changes will take effect after a full reboot on the newest kernel.

Current GeForce/Quadro/Tesla

This driver is suitable for any GPU found in 2010 and later. 

dnf install xorg-x11-drv-nvidia akmod-nvidia "kernel-devel-uname-r == $(uname -r)"
dnf update -y

or kmod-nvidia/kmod-nvidia-PAE if using pre-built kmod for kernel/kernel-PAE

Please note that as of today, the more recent nvidia driver release doesn't officially support Xorg server 1.19 as found in Fedora 25 and later. Support for Wayland is also missing in any nvidia driver as it's the default for Fedora 25.

Legacy GeForce 8/9/200

dnf install xorg-x11-drv-nvidia-340xx akmod-nvidia-340xx "kernel-devel-uname-r == $(uname -r)"
dnf update -y

or kmod-nvidia/kmod-nvidia-PAE if using pre-built kmod for kernel/kernel-PAE

Legacy GeForce 6/7

dnf install xorg-x11-drv-nvidia-304xx akmod-nvidia-304xx "kernel-devel-uname-r == $(uname -r)"
dnf update -y

Legacy GeForce 5 (FX series)

Supported up to Fedora 20 - EOL, no more nvidia updates 

yum install akmod-nvidia-173xx "kernel-devel-uname-r == $(uname -r)"
yum update -y

Legacy GeForce 2 through GeForce 4

Supported up to Fedora 14 - EOL, no more nvidia updates 

yum install akmod-nvidia-96xx "kernel-devel-uname-r == $(uname -r)"
yum update -y

Special notes

Optimus

There are additional steps required to work with optimus. Please see the dedicated Howto/nVidia_Optimus.

CUDA

The driver support CUDA when installing the xorg-x11-drv-nvidia-cuda subpackage. Please have a look on the official NVIDIA getting started guide 

dnf install xorg-x11-drv-nvidia-cuda

VULKAN

The main package support vulkan, but you need to install the vulkan libraries if requested. 

dnf install vulkan

Latest/Beta driver

You can install the latest drivers from Rawhide using the following command: 

dnf install "kernel-devel == $(uname -r)"
dnf update -y
dnf --enablerepo=rpmfusion-nonfree-rawhide install akmod-nvidia

Or if you want to grab it from the latest fedora stable release: 

dnf install "kernel-devel-uname-r == $(uname -r)"
dnf update -y
dnf --releasever=25 install akmod-nvidia xorg-x11-drv-nvidia

x86_64 (64bit) users

If you wish to have 3D acceleration in 32bit packages such as Wine, be sure to install the appropriate 32bit version of the xorg-x11-drv-nvidia-libs package for your driver variant. For example, if you installed kmod-nvidia then you will require xorg-x11-drv-nvidia-libs.i686, but if you install kmod-nvidia-96xx, you will need xorg-x11-drv-nvidia-96xx-libs.i686. If using Fedora 11 you will need to use xorg-x11-drv-nvidia-libs.i586, with Fedora 10 or older use xorg-x11-drv-nvidia-libs.i386.

PAE (Physical Address Extension) kernel users

If you are on a 32bit (i686) system and have the kernel-PAE installed to access more RAM, please install kernel-PAE-devel. Please note that this step is not required for any 64bit (x64_64) users.

VDPAU/VAAPI

In order to enable video acceleration support for your player and if your nvidia card is recent enough (Geforce 8 and later is needed). You can install theses packages: 

# dnf install vdpauinfo libva-vdpau-driver libva-utils

With the native vdpau backend from a nvidia card, the output is similar to this: 

$ vdpauinfo 
display: :0.0   screen: 0
API version: 1
Information string: NVIDIA VDPAU Driver Shared Library  280.13  Wed Jul 27 17:15:20 PDT 2011
...

Here is an example of an accurate output of vainfo, when the bridge to the VAAPI is correctly installed. 

$ vainfo 
libva: libva version 0.32.0
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
libva: va_getDriverName() returns 0
libva: Trying to open /usr/lib64/dri/nvidia_drv_video.so
libva: va_openDriver() returns 0
vainfo: VA API version: 0.32
vainfo: Driver version: Splitted-Desktop Systems VDPAU backend for VA-API - 0.7.3
vainfo: Supported profile and entrypoints
...

Akmods

An akmod is a type of package similar to dkms. As you start your computer, the akmod system will check if there are any missing kmods and if so, rebuild a new kmod for you. Akmods have more overhead than regular kmod packages as they require a few development tools such as gcc and automake in order to be able to build new kmods locally. If you think you'd like to try akmods, simply replace kmod with akmod in the instructions above and run them again. For example, kmod-nvidia-96xx becomes akmod-nvidia-96xx. Akmods are fully compatible with regular kmods, so you can switch between the two or even use both at once without any problems.

Nouveau compatibility

As nouveau is enabled by default starting with Fedora 11, you may experience problem which is caused by the nouveau kernel module being present in the initrd image. Once the driver is installed and after the reboot, this command should not output anything: 

lsmod |grep nouveau

Secure Boot

Sometimes, Secure Boot blocks the kernel loading the nvidia driver. It can be disabled before booting the OS as a test.

Rawhide

Rawhide kernels are built with debug enabled GPL-only symbols which kernel is incompatible with the nvidia binary-only driver. You need to use the Rawhide nodebug repository.

Please remind that Xorg server version is also to take into consideration. In the case of incompatibilities with the xorg-server, you might need to downgrade to the previous fedora release: 

dnf downgrade xorg-x11-server\* --releasever=22 --allowerasing
echo "exclude=xorg-x11*" >> /etc/dnf/dnf.conf

Uninstall the nvidia driver

dnf remove xorg-x11-drv-nvidia\*

Bug Report

If you still cannot make the driver to work, you can either report a problem to nVidia or to RPM Fusion packager team. Please read: If you have a problem, PLEASE read this first

CategoryHowto

Howto/NVIDIA (last edited 2024-08-30 16:31:12 by NicolasChauvet)